8369 803 028  9591 742 073  9619 634 159 โœ‰๏ธ activefacadesales@gmail.com ๐Ÿ“‹ Free Site Survey
๐Ÿ—๏ธ Twin Track BMU ๐Ÿ›ค๏ธ Monorail โšก Suspended Platforms ๐Ÿš Aerial / Scaffold ๐Ÿ”ฉ Davit JIB ๐Ÿชฃ Cleaning ๐Ÿง— Spiderman ๐Ÿ—๏ธ Access ๐Ÿ”ง Restoration ๐Ÿ”ฉ Maintenance ๐Ÿ”ฉ Register Brackets
01
Access System

Twin Track BMU System

These are customized building maintenance units, designed for buildings where an extensive outreach is required; the BMU Cradle Roof machine can be stationary or traversing on concrete path or on steel tracks depending on the project. A Facade Access BMU Cradle is suspended from the Roof machine jib arm that is moved up, down and sideways. AFS offers wide range of Facade Access BMU Cradle Roof Machines such as Trackless BMU Cradle Roof Machines, Twin track BMU Cradle Roof Machines, Telescopic BMU Cradle Roof Machines, Parapet mounted BMU Cradle Roof Machines and custom designed Facade Access BMU Cradle Roof Machines to suit the architectural & structural requirements.

  • โœ“ Custom roof car designed to building geometry and roof structure
  • โœ“ Precision track systems for smooth horizontal movement
  • โœ“ In-house factory fabrication with full quality control
  • โœ“ Electrically powered hoisting for safe, efficient operation
  • โœ“ Complete installation, load testing and commissioning
  • โœ“ Ongoing inspection, servicing and emergency call-out support
Capacity
250โ€“500 kg
Platform load rating
Height Range
Any Height
Suitable for all high-rises
Request a Free Site Survey โ†’
Twin Track BMU System
02
Access System

Monorail System

Monorail systems use an overhead track fixed to the building structure to allow a suspended cradle to traverse horizontally with precision. Ideal for buildings where a traditional roof car is not feasible โ€” such as podium levels, irregular rooflines, or cantilevered facades.

Each system is custom-designed to the specific profile of your building, ensuring complete facade coverage in the most efficient way possible.

  • โœ“ Custom monorail track design for building-specific geometry
  • โœ“ Smooth motorised horizontal traverse along fixed overhead track
  • โœ“ Secure anchoring with safety-focused structural connections
  • โœ“ Compatible with solo and two-man suspended cradles
  • โœ“ Suitable for podium facades, irregular setbacks and stepped profiles
  • โœ“ End-to-end service: installation, inspection and annual maintenance
Enquire About Monorail โ†’
Monorail System Types
Motorised Traverse Drive System

Motorised Traverse

An electrically driven trolley runs along the fixed overhead monorail track, moving the suspended cradle horizontally at the push of a button. Variable-speed motor control ensures precise positioning across every section of the facade with minimal operator effort.

  • โœ“ Variable-speed electric drive motor
  • โœ“ Operator-controlled from inside the cradle
  • โœ“ Safe end-stop travel limiters as standard
Custom Track Design Track

Custom Track Design

Every building has a unique roofline. Our engineers design the monorail track layout to match setbacks, corners, and overhangs precisely โ€” ensuring 100% facade coverage with no blind spots or awkward manual repositioning required.

  • โœ“ CAD-drawn to building survey drawings
  • โœ“ Handles corners, curves and setbacks
  • โœ“ Full structural load calculations provided
H-Beam Track Profile Type

H-Beam Track

  • โœ“ High load capacity for long spans
  • โœ“ Minimal deflection under full working load
  • โœ“ Hot-dip galvanised for corrosion resistance
Aluminium Alloy C-130 Profile Type

Aluminium Alloy C-130

  • โœ“ Lightweight โ€” reduces structural loading
  • โœ“ Corrosion-resistant aluminium alloy
  • โœ“ Ideal for refurbishment & retrofit projects
Safe Anchoring Structure

Safe Anchoring

The monorail is fixed to the primary building structure using engineered anchor plates and structural brackets, designed and load-tested to exceed working load requirements with full safety margins as per IS and international standards.

  • โœ“ Structural engineer certified anchors
  • โœ“ Load tested post-installation
  • โœ“ Full certification documentation provided
03
Platform System

Power Suspended Platforms

Electrically powered suspended work platforms (motorised cradles) hang from a roof-mounted suspension system. Operators control vertical movement using on-board controls, allowing safe and efficient access to any section of a facade.

We supply solo (single-person) and two-man cradle variants, both designed and tested for safe at-height operations on high-rise buildings.

  • โœ“ Electrically powered โ€” smooth, controlled descent and ascent
  • โœ“ Fail-safe braking and overload protection built in
  • โœ“ Available in solo and two-man configurations
  • โœ“ Compact and easy to deploy and relocate
  • โœ“ Used for cleaning, waterproofing, glass replacement and painting
  • โœ“ Full supply, installation and commissioning included
  • โœ“ Customization is available in sizes
Configuration
Solo
One Man Cradle
Configuration
2-Man
Two Man Cradle
Drive
Electric
Smooth powered operation
Rotation
360ยฐ
Total Rotation
Request This Service โ†’
Power Suspended Platform
04
Elevated Access

Aerial Work Platform & Scaffold

Aerial work platforms (AWPs) provide safe, self-contained elevated access for maintenance, installation, and inspection tasks at lower to mid-range heights. Combined with aluminium scaffold systems, these offer the most versatile and rapidly deployable access solution.

Our systems are designed for ease of movement around a site while maintaining rigorous safety standards โ€” no permanent structural modifications required.

  • โœ“ Rapid deployment โ€” no permanent installation required
  • โœ“ Aluminium scaffold for light, adjustable elevated platforms
  • โœ“ Ideal for podiums, lower facades and internal atrium maintenance
  • โœ“ Suitable for glass cleaning, silicone pasting and minor repairs
  • โœ“ Operated by trained, certified technicians
  • โœ“ Safe load ratings and anti-slip platforms as standard
Rapid Deployment Aluminium Scaffold No Permanent Install Podium Access
Enquire About This System โ†’
Aerial Work Platform
05
Access System

Davit JIB System

Davit jib systems provide localised facade access by suspending a cradle or rope access operator from a fixed jib arm. Installed at intervals around the roof parapet or floor slab, they offer a flexible, cost-effective alternative to a full roof car BMU system.

We supply motorised davits, parapet davits, and roof davits โ€” all custom-sized to the building's structural requirements.

  • โœ“ Floor-mounted base with strong, reliable structural anchoring
  • โœ“ Motorised and manual variants available
  • โœ“ Easy rotation to cover multiple facade panels per installation point
  • โœ“ Suitable for buildings where a full BMU is not viable
  • โœ“ Full installation, load testing and certification included
  • โœ“ Annual inspection and maintenance contracts available
Coverage
360ยฐ
Full rotation per davit point
Support
24 / 7
Emergency call-out available
Request a Davit System โ†’
Davit JIB System
Davit JIB System Types
Motorised Davit Motorised

Motorised Davit

The motorised davit incorporates an electric drive unit that raises and lowers the suspended cradle automatically, providing smooth, controlled vertical movement without manual effort. Ideal for frequent-use applications and taller buildings where manually operated systems would be impractical or fatiguing for operators.

  • โœ“ Electric motor for effortless hoisting
  • โœ“ Overload cut-out & fail-safe brake
  • โœ“ Operator-controlled from inside the cradle
  • โœ“ Ideal for high-rise & frequent-use applications
Parapet Davit Parapet

Parapet Davit

Parapet davits are specifically designed to clamp or anchor onto the building parapet wall, without the need for any roof penetration or structural modification. This makes them a fast, cost-effective solution for buildings where roof access is restricted or where a non-invasive installation is required.

  • โœ“ Clamps onto existing parapet โ€” no drilling required
  • โœ“ Fast installation & easy repositioning
  • โœ“ Suitable for residential & commercial buildings
  • โœ“ Available in manual & motorised variants
Roof Davit Roof Mounted

Roof Davit

Roof-mounted davits are permanently installed into purpose-made base sockets cast into the roof slab. The davit arm inserts into the socket and can be removed and repositioned to different socket points around the perimeter, allowing full facade coverage with minimum capital outlay.

  • โœ“ Permanent sockets for long-term use
  • โœ“ Arm is removable & portable around roof
  • โœ“ Covers full building perimeter efficiently
  • โœ“ Load tested & certified on installation
06
Cleaning Service

Facade Cleaning

A clean building presents a more hospitable front โ€” and a more attractive real estate prospect. Beyond aesthetics, facade cleaning removes damaging pollutants (Sulphur & Nitrogen oxides) that accelerate facade deterioration.

We undertake facade cleaning contracts for high-performance buildings with glass facades or structural glazing. Our trained teams restore building exteriors to pristine condition using proven, safe methods.

  • โœ“ Glass, ACP, stone, GRC and composite cladding all covered
  • โœ“ Specialist chemical selection for each facade type
  • โœ“ Safe access using BMU, davit, rope or scaffold as required
  • โœ“ One-off deep cleans and ongoing AMC contracts available
  • โœ“ Minimum disruption to building operations
Request This Service โ†’
Facade Cleaning
Cleaning Methods
Water Soaking Method 01

๐Ÿ’ง Water Soaking

Water soaking is a gentle, low-pressure pre-treatment method used to loosen and dissolve surface dirt, dust, and light pollution deposits before manual cleaning or wiping. It is the preferred first step for delicate glass facades and high-performance coatings where abrasion or high pressure could cause damage to the surface or its protective film.

  • โœ“ Safe for all coated & tinted glass surfaces
  • โœ“ Softens stubborn grime before wiping
  • โœ“ Low water consumption process
  • โœ“ No risk of surface damage or streaking
Jet Pressure Washing Method 02

๐Ÿ”ซ Jet Pressure Washing

High-pressure jet washing is highly effective for removing stubborn stains, biological growth (mould, algae, lichen), paint overspray, and heavy soiling from stone, concrete, ACP, and GRC cladding surfaces. Pressure is carefully controlled and nozzle selection is matched to the surface type to ensure deep cleaning without causing erosion or joint damage.

  • โœ“ Removes biological growth & heavy soiling
  • โœ“ Adjustable pressure matched to each surface
  • โœ“ Effective on stone, concrete, ACP & GRC
  • โœ“ Fast turnaround for large facade areas
Chemical Cleaning Method 03

๐Ÿงช Chemical Cleaning

Specialist cleaning chemicals are applied to target specific types of contamination that water or pressure alone cannot remove โ€” such as mineral deposits, rust stains, efflorescence, silicone residue, and atmospheric pollution marks. Chemicals are carefully selected for compatibility with each facade material and applied at controlled dilutions to ensure effective cleaning without damaging sealants, coatings, or the substrate.

  • โœ“ Targets mineral, rust & pollution stains
  • โœ“ Material-safe chemical selection per facade type
  • โœ“ Neutralised & fully rinsed after application
  • โœ“ Safe for glass, stone, ACP & coatings
Steam Cleaning Method 04

โ™จ๏ธ Steam Cleaning

Steam cleaning uses high-temperature dry steam to sanitise and deep-clean facade surfaces without the need for chemicals or excessive water. The intense heat kills mould spores, bacteria, and biological growth at the root, making it the most hygienic cleaning method available. Particularly effective on glass, metal cladding, and any surface where residue-free results are essential.

  • โœ“ Chemical-free & eco-friendly process
  • โœ“ Kills mould, bacteria & biological growth
  • โœ“ Leaves no residue on glass or metal surfaces
  • โœ“ Ideal for food-grade & sensitive buildings
07
Rope Access

Spiderman Service

Our rope access service uses industrial-grade Kermantle ropes and imported access kits (UK / France) to allow certified operators to descend building facades with complete safety and precision โ€” at a fraction of the cost of scaffolding or BMU deployment.

Ideal for one-off repairs, inspections, silicone pasting and targeted cleaning where a full access system is not required.

  • โœ“ Fail Safe Capability โ€” independent safety line at all times
  • โœ“ One-to-Two Pulley Ratio for smooth, controlled descent
  • โœ“ One Man Operation โ€” minimal crew, maximum efficiency
  • โœ“ Portable and Lightweight โ€” no roof equipment needed
  • โœ“ Imported Kits from UK / France โ€” highest safety standards
  • โœ“ Certified Kermantle Ropes โ€” parachute grade, 1 tonne rated
Rope Rating
1 Tonne
Parachute grade Kermantle
Kit Origin
UK / France
Certified imported gear
Book a Rope Access Team โ†’
Spiderman Rope Access
08
Equipment Supply

Access Solutions

We supply, install, and maintain the full range of facade access equipment โ€” from BMU trolleys to eyebolt anchor systems.

BMU Trolley

BMU โ€“ Trolley System

Roof-mounted trolley traversing system for full horizontal facade coverage.

Solo Cradle

Solo Cradle

Single-operator electrically powered suspended cradle for individual facade access tasks.

Two Man Power Cradle

Two Man Power Cradle

Electrically powered two-operator cradle for larger facade areas requiring simultaneous two-person access.

Motorised Davit

Motorised Davit

Electrically driven jib arm davit for effortless cradle deployment and retrieval at any height.

Parapet Davit

Parapet Davit

Clamp-on davit requiring no roof penetration โ€” fast to install and easy to relocate around the building.

Roof Davit

Roof Davit

Socketed roof-mounted davit arm โ€” removable and repositionable to full perimeter socket points.

Monorail

Monorail

Overhead fixed-track system for smooth motorised horizontal traverse of suspended cradles.

Eyebolt

Eyebolt

Certified anchor eyebolts and aluminium scaffold systems for rope access and lower-level facade work.

09
Restoration

Facade Restoration

While engaged in facade rectification work over an extensive period, we have observed several potential issues associated with substandard facade installation. Our bespoke restoration service addresses all these issues to restore your building's exterior and long-term integrity.

  • โœ“ Water Leakage Testing โ€” pressure method survey and diagnosis
  • โœ“ Waterproofing โ€” silicon filling and weatherproof sealant application
  • โœ“ Facade Glass Unit Replacement โ€” residential, commercial and industrial
  • โœ“ Stone Cladding โ€” assessment, preparation, installation and finishing
  • โœ“ ACP panel repair and colour-matched restoration
  • โœ“ Structural glazing re-bonding and sealant renewal
Request a Restoration Survey โ†’
Restoration
Restoration Services
Silicone Pasting Sealing

Silicone Pasting

Deteriorated or failed silicone sealant joints are the leading cause of water ingress in glass and ACP facades. Our technicians remove the old sealant, prepare the joint substrate, and apply high-performance structural or weatherproofing silicone โ€” matched to the original specification โ€” ensuring a durable, watertight bond that restores the facade's weathering performance for years ahead.

  • โœ“ Full joint preparation & primer application
  • โœ“ Colour-matched silicone to original spec
  • โœ“ Structural & weather-seal grades available
  • โœ“ Eliminates water ingress at sealant joints
Glass Replacement Glass

Glass Lifter Device

Cracked, broken, delaminated, or failed sealed units are a safety risk and an energy efficiency problem. We carry out glass unit replacement at height using suspended access equipment, supplying and installing matching single-pane, double-glazed, or laminated safety glass panels across residential, commercial, and industrial buildings with minimum disruption to occupants.

  • โœ“ Single, double & laminated glass units supplied
  • โœ“ Replacement at any height via BMU or rope access
  • โœ“ Panels matched to existing facade specification
  • โœ“ Residential, commercial & industrial coverage
Waterproofing Waterproofing

Waterproofing

We conduct comprehensive water leakage surveys using the pressure method to identify exactly where water penetration is occurring, then apply targeted waterproofing solutions โ€” from sealant application to membrane coatings โ€” that eliminate ingress at its source. Our approach addresses both visible water damage and hidden moisture infiltration that can cause long-term structural damage if untreated.

  • โœ“ Pressure-method leakage survey & diagnosis
  • โœ“ Targeted sealant & membrane application
  • โœ“ Addresses hidden moisture infiltration
  • โœ“ Post-treatment water test certification provided
Stone Cladding Cladding

Stone Cladding

Stone cladding panels that have cracked, debonded, or suffered movement can pose a serious public safety risk. Our team carries out a full condition survey of the stonework, identifies areas of concern, removes damaged panels safely using at-height access, and installs replacement stone or matching composite panels to restore the facade's appearance and structural integrity.

  • โœ“ Full condition survey of existing stonework
  • โœ“ Safe removal of debonded or cracked panels
  • โœ“ Matching stone or composite replacement
  • โœ“ Re-anchoring & joint sealing included
10
Annual Contract

Facade Maintenance

Annual BMU maintenance contracts with monthly visits for inspection, testing, and commissioning. We inspect, service, and repair equipment to ensure safe operating conditions every time.

๐Ÿšจ

Emergency Call-Out Service

We deploy a technician on an urgent basis whenever system failure occurs โ€” minimising your downtime and keeping your building operational.

01
Practical analysis of facade cleaning cycle to help facility teams plan usage well in advance.
02
Avoid hidden financial risks with transparent maintenance reporting and equipment history.
03
Minimize maintenance and wear-and-tear costs for your facade cleaning equipment.
Get a Maintenance Contract โ†’
Maintenance
11
EYE BOLT

EYE BOLT

An eyebolt is a strong fastening device featuring a threaded shaft with a circular loop at one end. It is widely used for lifting, rigging, anchoring, and securing heavy loads using ropes, chains, hooks, or cables. Eyebolts are commonly manufactured from stainless steel, carbon steel, or galvanized steel to provide durability and corrosion resistance in industrial, construction, and marine applications. Available in various types such as shoulder, plain, machine, and lag eyebolts, they are designed to handle different load directions and installation requirements safely and efficiently.

  • โœ“ Shoulder Eyebolts
  • โœ“ Plain Eyebolts
  • โœ“ Machine Eyebolts
  • โœ“ Lag Eyebolts
  • โœ“ Forged Eyebolts
  • โœ“ Stainless Steel Eyebolts
Material
SS304, SS316, Mild Steel
Contact for Information
Standards
DIN, ASTM, IS
Contact for Information
Request a Free Safety Survey โ†’
Safety

Need a Custom Solution?

Get a free site survey โ€” we'll assess your building and recommend the perfect approach.

๐Ÿ“žCall Now ๐Ÿ’ฌWhatsApp